Mini Cart

  • No products in the cart.

Element Medical Vapman - Classic Portable Vaporizer - Yew Tree Wood

£99.95

The Vapman Classic Portable Vaporizer brings flawless Swiss design and craftsmanship to the UK. The Vapman is possibly the best thought out design for a manual portable vaporizer we have ever seen, using a jet flame butane lighter the user has full control over the tempertaure and airflow allowing full control over the vaporizer experience.   This simple and effective vaporizer easily...

Order in the next to get it by
Always Free Shipping Within

Description

The Vapman Classic Portable Vaporizer brings flawless Swiss design and craftsmanship to the UK. The Vapman is possibly the best thought out design for a manual portable vaporizer we have ever seen, using a jet flame butane lighter the user has full control over the tempertaure and airflow allowing full control over the vaporizer experience.

 

This simple and effective vaporizer easily competes with models costing 3 or 4 times the price. The heat source is a jet flame lighter (Not supplied) which allows total control over the length and intensity o the heat applied. Due to its intelligent design and well-thought out airflow the Vapman is able to produce smooth, tasty vapor in a matter of seconds. By changing the speed and duration of the airflow the Vapman is capable of producing anything from thick clouds to subtle bursts of intense flavour,

 

Handcrafted in Switzerland using only the finest available materials, the Vapman is composed of two main pieces. The circular body of the Vapman is held in one hand whilst you apply heat with a jet flame lighter using the other. The mouthpiece section is held in place with springs. Simply twist the mouthpiece out before placing your choice of herbs in the gold-plated copper pan. Twist the mouthpiece back in and slowly begin to heat the other end with a jet flame lighter.

 

Because the heat source is manual you have a huge amount of control over the type of vapor the Vapman produces. Hit it hard and long with the flame whilst inhaling deeply to raise temperatures quickly creating thick vapor clouds or gently apply the flame off and on whilst taking long slow draws on the mouthpiece to produce gentle clouds of vapor.

 

How to use and care for your Vapman

 

Please read the following operating instructions carefully. If you still have questions about the device, please contact us directly. For questions regarding the dosage and the suitability of plants, please ask your aroma-therapist or alternative practitioner or consult the specialized literature. The device lets itself be handled intuitively and offers gentle, pleasant enjoyment plus swift effectiveness. You will find it completely convincing. Just try it and see how it suits you best.

 

Opening and filling

Open the container by pressing on the sides and carefully drawing the two halves apart. Then take out the middle section by turning it anti-clockwise. (1) Then insert the funnel tube so that the herbs do not get stuck to the edge and are later burnt off. Hold the vapman vertically when filling it, or place it on a level surface. Fill the finely chopped herbs only as far as the edge of the pan so that the air can later circulate freely. The vaporizer will not function if it is too full. (2) After filling, take the funnel tube out again and remove any excess herbs from the edge of the pan, either with your fingers or with a toothpick, (3) and then replace the middle section again. (4) Should any herbs have remained caught on the edge, remove these with a toothpick or by blowing them away.

Heating

Hold the vapman by the handle ring (see the arrows in the diagram). Touch the apex of the copper pan with the tip of the flame jet. The length of time required for the heating will depend on the size of the flame. The following can serve as a guide

Flame approx. 10 mm: 5-6 seconds
Flame approx. 15 mm: 3-4 seconds
Flame approx. 20 mm: 2-3 seconds

If the pan is cold, it must first be warmed up at intervals of ca 2 seconds so that the heat can be distributed evenly. Just try it out for yourself. When you inhale, you will quickly notice whether the ideal temperature has already been reached. Rather heat too little than too much.

Emptying

The process is finished when you can feel none of the active ingredients any more. Unscrew the middle section (7) and check the colour of the herbs. They should have been coloured brown. Tap out the contents and remove any residual herbs with a toothpick. (8) After each filling, give the filter a good rub on a piece of cloth or a paper towel.

 

Maintenance

How often you have to clean your vapman depends on the kind of herbs that you inhale. In order for it to function perfectly, neither the air-holes in the middle section nor the air nozzles may be blocked. You can remove residue with a needle. The mouthpiece can be cleaned either with methylated spirits or hot water. Now and then it is advisable to unscrew the filter and clean it with alcohol. You can scrape away any residue on the middle section. For a complete cleaning process, the middle section can be placed in acetone. The pan can be cleaned with a cotton bud soaked in alcohol or aceton. The heat protection (mica) should not be cleaned and should not get in contact with liquids. Parts of it can flake off after frequent use, though this is not unusual and has no impact on the lifespan of your vapman.

Delivery

Delivery

This item ships from the   

Delivery

Estimated between  and

We usually ship all items within 24 hours of receiving your order

Reviews